While you have many devices on your Network—computers, NAS devices, and Raspberry Pis, it cannot be pleasing to continually look up their IP addresses when you require to access them remotely. Give your life more comfortable with a set of unchanging, static IP addresses for those devices.
Some users would like to have identical IP addresses assigned to their Airtame every time they connect to a specific network. Airtame doesn’t yet have this setting built-in, so you will need to make the IP limitation in your DHCP server.
What you’ll need
- Entrance to the Network’s configuration panel. Usually obtained through the IP 192.168.0.1 or find your router here.
- The MAC address of the particular Airtame 1 AP (2.4GHz of 5GHz) used to connect to the Network’s access period. (Airtame 2 has a centralized MAC address)
- The wanted, available, IP address.
Benefits of a static IP
- There are tremendous advantages to using a static IP address. Amongst these benefits are:
- Better DNS guide: Static IP addresses are much more peaceful to set up and run with DNS servers.
- Server hosting: If you are receiving a web server, email server, or any other set of servers, having a static IP address makes it easier for customers to find you via DNS. Realistically speaking, it’s more expeditious for customers to get to your websites and services if they have an unvarying IP number.
- Convenient remote access: A static IP address performs it easier to work remotely using a Virtual Private Network (VPN) or other remote access programs.
- Besides secure communication: Static IP addresses make it more relaxed to use Voice over Internet Protocol (VoIP) for teleconferencing or separate voice and video communications.
Wherewith to set Static IP address in Windows 7, 8, or 10
- To replace the computer’s IP address in Windows, you’ll need to open the “Network Connections” windowpane. Hit Windows+R, type “ncpa. CPL” into the Run box, and then tapped enter.
- In the “Network Connections,” right-click the adapter required to set a static IP address, and then pick the “Properties.”
- In the sections window for the adapter, choose “Internet Protocol Version 4 (TCP/IPv4)” and next click the “Properties” button.
- Select the “Use the subsequent IP address” option, type in the IP address, subnet mask, and neglect gateway compared with your network setup. Next, type in your selected and alternate DNS server addresses. Lastly, decide the “Validate settings upon exit” choice so that Windows immediately checks your new IP address and corresponding information to secure that it works. While you’re ready, click the “OK” button.
- Windows automatically run system diagnostics to check that the connection is safe. If there are obstacles, Windows will supply you with the option of running the Web troubleshooting authority. However, if you run into difficulty, the wizard likely won’t do you too much asset. It’s more satisfying to verify that your settings are valid and try repeatedly.
Fixed a Static IP Address in Windows Vista
- Renewing your IP from DHCP to a Static address in Vista is related to other accounts of Windows, but getting to the right location is a little different. Begin the Start Menu, right-click on Network, and pick Properties.
- Right-click on the network adapter. You all need to specify an IP address and click Properties.
- Now improve the IP, Subnet Mask, Default Gateway, and DNS Server Addresses. While finished, click OK.
- You’ll want to close out of Local Area Connection Properties for the settings to go into impact.
- Open the Command Prompt and apply the config command to verify that the changes were successful.
For the process of setting up a static IP address and home network monitoring, you can read this article from routerlogin.Mobi and learn more.
Static IP addresses are most suitable for businesses, which treat their websites and internet services. Static IP addresses also operate well when you have exclusive workers logging into place via a VPN.